Sprockets & Platewheels by Cross+Morse

To complete the Chain Drive a comprehensive range of Standard Pinions, Wheels and Platewheels stocked for B.S. Standard Chains up to 2” pitch are offered, and Sprockets for ANSI Chains and other special chains can be manufactured to customers specifications. Pinions and platewheels are normally manufactured from medium carbon steels for high strength, and can be induction hardened for additional wear resistance. Pinions and wheels for precision roller chain and inverted tooth chains have fully machined teeth to ensure accuracy of engagement with mating chains. Standard Sprocket Range includes taper bore sprockets and bushes for quick assembly, low price finished bore product with high torque capability; idler sprockets and chain tensioners.

Bolt on Taper Bore Hubs

Cross+Morse Taper bore bolt on hubs are available to suit five different taper bushes. They are made of high grade cast iron and are phosphated.

Double Simplex Sprockets

For powered roller conveyor, a range of B.S. Double Simplex sprocket from 12 to 25 teeth for 3/8" to 1" chain are available pilot bored or with taper bore.

Taper Bore Sprockets and Bushes

Available from stock are taper bore steel sprockets in most tooth sizes up to 30 teeth, and above in cast iron up to 114 teeth, for British Standard simplex, duplex, and triplex chains from 3/8" to 1" pitch. Also, a complete range of Taper Bushes with both imperial and metric bore sizes.

Simplex Sprockets with Induction Hardened Teeth

We now offer a Standard Stock Range of Pilot Bore Sprocket in C45 with Induction Harden teeth, which have the same dimensions as the Standard pilot bore range. These sprockets can be machined to suit a customer own requirements.